LEADLAMPS

Product Description

The Wolf ATEX Portable Fluorescent Leadlamp is CE marked to the 94/9/EC ATEX Equipment Directive, allowing use in Zone 1 (Cat 2) IIC potentially explosive gas, vapour, mist and dust atmospheres, where a T3/T4 temperature class permits.

Available with twin side by side forward facing, or quad back to back 18W, 36W or 55W energy efficient fluorescent lamp combinations in a wide range of voltages (24V – 254V) the luminaires are suitable for a multitude of applications where a temporary light is required for extended periods of time inside a potentially hazardous area. 

The Luminaires can be supplied with direct cable entries or fitted with ATEX plugs/sockets to allow the units to be instantly linked in series (plug and play), allowing for quick and easy installation over a large area.

Unistrut compatible mounting points located on the lamps provide a flexible installation solution allowing the luminaires to be quickly and easily fixed in position on pipes, scaffold or a ferrous backdrop with magnetic fixings.  A Wide range of Unistrut compatible products are available providing a quick, easy and low cost solution for mounting the lamps

Easy maintenance is a key feature of Wolf Portable Fluorescent Leadlamp range, re-lamping is simple and quick using standard compact fluorescent lamps readily available from electrical retailers, The operation takes no more than a few minutes and can be done by any competent electrical engineer.

Rugged construction, and compact design allow lights to be connected together in the explosive atmosphere while energised. A hanging/carrying strap is supplied as standard. Portable versions are supplied with an anti-static protective coating.

Compliant with the ATEX Equipment Directive and certified to the latest standards, including ‘End of Life’ protection circuit ballast for enhanced safety, in accordance with HSE safety notice 8/05.

An Emergency T4 version is available with T8 Lamp operating at 110V or 240V only.

A range of ATEX compliant transformers is available, rugged design and construction for use in or near hazardous locations. 

Technical Specification

Wolf Portable Leadlamp - LL-500
2 x 36W 180° or 4 x 36W 360° Worklight
Peak Luminous Intensity at 5m 138 lux
Peak Luminous Intensity at 2.5m 36 lux

 

Product Reference		LL-500
Product Description		ATEX Fluorescent Leadlamp
Code		II 2 GD Ex emb II T3/T4 Ex tD A21 IP66/67/68 T100°C II 2 GD Ex embd IIC T3/T4 Ex tD A21 IP66 T100°C (Linkable)
Apparatus Standards		EN60079-0, EN60079-7, EN60079-18, EN61241-0, EN61241-1
Type of Protection		"e" increased safety, "m" encapsulation, "d" flameproof
Area of Classification (Gases)		Zones 1 & 2, Gas Groups IIA, IIB, IIC
Temperature Class		T3 on CFL Portable Units T4 on 'T8' lamp Static Application Units
Area of Classification (Gases)		Zones 21 & 22
Max Surface Temp (Dusts)		100°C
Ambient Temperature		2 x CFL Unit: (-20°C to +44°C) 4 x CFL Unit: (-20°C to +35°C) 2 x T8 Unit: (-20°C to +53°C) 2 x T8 Emergency Unit: (-15°C to +53°C)
Certificate		SIRA08ATEX3098
Enclosure		Polymer / Aluminium End Caps
Lens		Polycarbonate with AntiStatic Coating
Beam Type		Wide angle, White, Area Light High Output, High Efficiency, Low Glare
Light Source:	Type	Standard 2G11 CFL Compact Fluorescent / T8 Fluorescent Lamps
	Life	Up to 10,000 hrs
	Power	2x18W	4 x 18W	2 x 36W	4 x 36W	2 x 55/58W	4 x 55/58W
	Typical Consumption	32W	64W	62W	124W	92W	184W
	Output	2400lm	4800lm	5800lm	11600lm	9600lm	19200lm
Voltage	220-254V AC/DC	✓	✓	✓	✓	✓	✓
	110-130V AC/DC	✓	✓	✓	✓	-	-
	42 - 52V AC/DC	-	-	✓	✓	-	-
	24 - 28V AC/DC	-	-	✓	✓	-	-
Weight		2.7kg	4.1kg	4.1kg	5.5kg	5.0kg	6.4kg
Length		0.3m	0.62m	0.58m	0.82m	0.78m	0.94m
Ingress Protection		IP66/67/68 (3M for 30 Minutes)

All products supplied with 4mm2 SY Cable and ATX plugs/sockets as standard.
All non-linkable lamps supplied with 10m of cable, all linkable lamps supplied with 5m of cable as standard.
All products supplied with fluorescent lamps fitted as standard.
Changes to the above specifications available on request.