Product Information
The high-tech Wolf ATEX LED Torch range uses the latest LED technology to give excellent performance and reliability in the most extreme conditions.
The Wolf ATEX LED Torch is CE marked to the 94/9/EC ATEX Directive and certified to the IECEx Scheme, with versions allowing use in M1 and M2 mining applications as well as Zones 0, 1 and 2 potentially explosive gas, vapour, mist and dust atmospheres, with T4 or T3 temperature class dependent on cell type used.
The compact and lightweight rightangle torch design has a high-grip ergonomic form with easy single handed switching, even with gloved hands. The high strength torch body has proven impact resistance at sub zero temperatures. The rubber armoured lens ring and end cap give enhanced grip and shock protection. The lens is resistant to scratch and chemical attack. The torch is sealed dust tight and protected from water immersion, with a certified IP67 enclosure. The right-angle body arrangement incorporates a replaceable high strength thermoplastic belt clip for hands free use.
The TR-40, TR-40+ and TR-45 give outstanding light output from unique optics that deliver a piercing spot beam, combined with a flood of lower level fringe light, giving a peak of 50 lumens light output from a high power Luxeon LED. The light source has a 25,000 hour life and should be regarded as 'fitted for life'. Powered by four AA/LR6 primary alkaline cells fitted in a cassette, Wolf ATEX LED Torches provide over 7.5 hours of light at full brightness, and thereafter at reducing brightness for up to 72 hours of total light output. The TR-40+ model is fitted with a low battery power indicator, emitting a red flashing light through the side of the torch body while battery power is high, but switching to continuous red to show low battery power when only a short period of full brightness light output remains.
Very low maintenance and quick component replacement are key benefits of this product range. All models are supplied with wrist straps and clip rings.
Technical Specification
TR-45 & TR-40/TR-40+
Wolf ATEX LED Torch
1.4W LED beam (approx 6°)
Peak luminous intensity at 5m, 230lux
| Product reference |
TR-40 |
TR-40+ |
TR-45 |
| Product description |
High Power LED right angle safety torch |
|
Yellow Body - Zone 1 |
Yellow Body - Zone 1
+ low battery indicator |
Black Body - Zone 0 |
| Code |
Industrial |
 II 2 GD Ex ib IIC T4/T3 tD A21 IP67 T85°C |
II 2GD Ex ib IIC T4 tD A21 IP67 T85°C |
| |
Mining |
I M2 Ex ib I IP67 |
I M1 Ex ia I IP67 |
| Apparatus standards |
EN60079-0, EN50020, EN61241-0, EN61241-1 IEC60079-0, IEC60079-11, IEC61241-0, IEC61241-1
|
| Type of protection |
'ia/ib' Intrinsic Safety, 'tD' Enclosure Protection
|
| Area of class (gases) |
Zones 1 & 2
gas groups IIA, IIB, IIC
|
Zones 0, 1 & 2
gas groups IIA, IIB, IIC
|
| Temp. class (gases) |
T4/T3 |
| Area of class (Dust) |
Zones 21 and 22 |
- |
| Max surface temp. (Dusts) |
85°C |
- |
| Ambient temperature |
-20°C to +40°C |
| Certificate |
Baseefa07ATEX0091
IECEx BAS 06.0089 |
| Enclosure Material |
High impact thermoplastic, chemical resistant, electrostatic non-hazardous |
| Lens |
Shatterproof polycarbonate with scratch and chemical
resistant hardcoat |
Toughened glass |
| Beam type |
High output beam with focussed spot with wide angle fringe of light |
| Light source: |
Type |
High power LED |
| |
Power |
1.4 Watts |
| Output |
50 lm peak |
| Bulb Life |
25,000 hrs plus (fitted for life) |
| Power Supply: |
Pt. no. |
TP-295 (4 x LR6 Cells)
|
| |
Cell Type |
LR6 primary cells to IEC60086, Alkaline AA cells |
| Volts |
4 x 1.5V |
| Low Battery Indicator |
- |
Yes |
- |
| Light duration |
Over 7.5 hrs at full brightness, up to 72 hrs total light duration |
| Ingress protection |
IP67 to EN60529: 1992 |
| Weight (incl. cells) |
0.350 Kg |
Note: all information has been gathered under laboratory conditions, the user must regard the values given as approximate.
